Advertisement
Quick Links
Advertisement
Related Manuals for Worx Nitro WX265L.X
Summary of Contents for Worx Nitro WX265L.X
- Page 1 WX265L WX265L.X...
- Page 5 I: 0-1200 rpm II: 0-2400 rpm III:0-3400 rpm...
-
Page 6: Table Of Contents
TABLE OF CONTENTS those dust masks that are specially designed to filter out microscopic particles. 1. SAFETY INSTRUCTIONS WARNING: This product can expose you to 2. COMPONENT LIST chemicals including lead and Di(2-ethylhexyl) phthalate (DEHP) which are known to the State of 3. - Page 7 the dust or fumes. 3) PERSONAL SAFETY c) Keep children and bystanders away while operating a) Stay alert, watch what you are doing and use a power tool. Distractions can cause you to lose common sense when operating a power tool. Do control.
- Page 8 are connected and properly used. Use of dust power tool repaired before use. Many accidents are collection can reduce dust-related hazards. caused by poorly maintained power tools. h) Do not let familiarity gained from frequent use of f) Keep cutting tools sharp and clean. Properly tools allow you to become complacent and ignore maintained cutting tools with sharp cutting edges tool safety principles.
- Page 9 WARNINGS from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. 1. Hold power tool by insulated gripping surfaces, when Liquid ejected from the battery may cause irritation performing an operation where the fastener may or burns.
- Page 10 SYMBOLS for use with the equipment. g) Keep battery pack out of the reach of children. h) Always purchase the battery pack recommended by the device manufacturer for the equipment. To reduce the risk of injury, user must i) Keep battery pack clean and dry. read instruction manual j) Wipe the battery pack terminals with a clean dry cloth if they become dirty.
- Page 11 Batteries may enter water cycle if disposed improperly, which can be hazardous for eco- system. Do not dispose of waste batteries as unsorted municipal waste. POSITEC Inc. has established a partnership with the RBRC Corporation to recycle any Positec batteries Do not burn with the RBRC-call2recycle seal.
-
Page 12: Component List
* Not all the accessories illustrated or described are voltage reaches maximum of 20 volts. Nominal voltage included in standard delivery. is 18 volts. 3.TECHNICAL DATA SUGGESTED BATTERIES AND Type WX265L WX265L.X (2 - designation of machin- CHARGERS ery, representative of screwdriver) WX265L WX265L.X ** Category Model... -
Page 13: Operating Instructions
Starting/Stopping 20V Charger WA3881 2.0 A WARNING: Do not operate at low speed for a long time, otherwise We recommend that you purchase your accessories overheating reaction will occur inside the listed in the above list from the same store that sold you machine. -
Page 14: Troubleshooting
6.MAINTENANCE the application that caused the tool to become overloaded. Then pull the Trigger Switch again to restart. • Overheated: Under the condition above, if the tool does Remove the battery pack from the tool before not start, the Tool and Battery are overheated. In this carrying out any adjustment, servicing or situation, let the Tool and Battery cool before pulling the maintenance. - Page 15 www.worx.com Copyright © 2023, Positec. All Rights Reserved. Copyright © 2023, Positec. Tous droits réservés. Derechos reservados © 2023, Positec. Todos los derechos reservados.
Need help?
Do you have a question about the WX265L.X and is the answer not in the manual?
Questions and answers