TABLE OF CONTENTS areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable 1. SAFETY INSTRUCTIONS liquids, gases or dust. Power tools create sparks which 2. COMPONENT LIST may ignite the dust or fumes. c) Keep children and bystanders away while operating 3.
Page 7
moving parts. Loose clothes, jewellery or long hair can be make a connection from one terminal to another. caught in moving parts. Shorting the battery terminals together may cause burns g) If devices are provided for the connection of dust or a fire.
Page 8
d) Do not subject battery pack to mechanical shock. e) In the event of battery leaking, do not allow the liquid Li-Ion battery, battery must be to come in contact with the skin or eyes. If contact recycled. has been made, wash the affected area with copious Li-I on amounts of water and seek medical advice.
NOTE: Before using the tool, read the instruction 3. TECHNICAL DATA book carefully. INTENDED USE Type WX542L WX542L.X (5- designation of The machine is intended for sawing wood, plastic, machinery, representative of Saw) metal and building materials while resting firmly on the WX542L workpiece.
ASSEMBLY AND OPERATION Bevel Cut Note: Remove the vacuum adapter before adjusting the ACTION FIGURE base plate. See Fig. F1- BEFORE OPERATION Note: Rotate the base plate to F3&G the desired position according Removing the battery pack See Fig. A1 to the scale.
The guide roller should occasionally be checked for wear and lubricated with a drop of oil. If it is worn, it must be replaced. 6. MAINTENANCE Remove the battery pack from the tool before carrying out any adjustment, servicing or maintenance.
Need help?
Do you have a question about the WX542L.X and is the answer not in the manual?
Questions and answers