Vinotemp element EL-46WCST Owner's Manual page 12

Dual-zone wine cooler
Table of Contents

Advertisement

SETTING A TEMPERATURE
Choose between Celsius and Fahrenheit by pushing the
now display in Celsius or Fahrenheit.
If setting the temperature, press the
or DOWN
pushing either buttons for the first time, the readout will show the original temperature set.
Pressing the UP
Pressing the DOWN
STORING WINE
Note: Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML
bottles and may include bulk storage. Many bottles differ in size and dimensions. As such, the
actual number of bottles you may be able to store may vary.
When adding a bottle to the wine cooler, make sure there is no contact with the back
interior of the cooler.
Ensure that no bottles are placed directly onto the electronic board of the control panel.
Always place bottles on the shelves only.
To avoid damage to the shelves and ensure the cooler maintains a consistent temperature,
do not overfill the wine cooler.
SHELVES
To prevent damaging the door gasket, make sure the door is fully open when pulling shelves
out of the rail compartment.
For easy access to the bottles stored, pull the shelves out approximately 1/3. The shelves are
designed with an emergency stop to prevent them being removed too far when loaded.
The shelves has been designed so that a range of shelf height can be selected. All the shelves
can be adjusted.
DOOR LOCK
The wine cooler comes with a lock and key combination. The keys are located inside the plastic bag
containing the Owner's Manual. To unlock the door, insert the key into the lock and turn it counter-clockwise.
To lock the door, insert the key and turn it clockwise, ensuring that the metal pin is fully engaged.
DEFROSTING
The wine cooler defrosts automatically. The evaporator behind the rear wall of the unit automatically defrosts
and the condensate collects in the drainage channel behind the rear wall of the unit, and flows through the
drainage hole into the drip tray by the compressor, where it evaporates.
12
button first. You can then select the UP
buttons to change the temperature in one degree increments. When
button will increase the temperature by 1 degree.
button will decrease the temperature by 1 degree.
button. The temperature will

Advertisement

Table of Contents
loading

Table of Contents