Related Manuals for jcb JCB-G8000PE
Summary of Contents for jcb JCB-G8000PE
- Page 1 7.5 kW SINGLE PHASE GENERATOR INSTRUCTION & USER MANUAL JCB-G8000PE Original Instructions IM-G8000PE-EN...
-
Page 2: Table Of Contents
Spark Plug Sediment Filter Cleaning Air Filter Troubleshooting Wiring Diagram Specification Warranty, Manual Updates, Returns, Reviews & Spare Parts Contact Us Recycling and Disposal & Environmental Protection CE Declaration of Conformity UKCA Declaration of Conformity JCB-G8000PE Instruction & User Manual... -
Page 3: Introduction
The safety precautions and warnings are to ensure your safety and protect you from harm or damage to the product. The information contained in this manual was accurate at the time of production, however Genpower Ltd & JCB may make modifications to the product without notification. JCB-G8000PE... -
Page 4: General Warnings & Disposal
Sound Warning : This machine exerts 97dB of noise during operation. Ensure this is considered whilst operating. Detonation Warning : Prior to refuelling always turn off the machine. After refuelling check for spilt fuel. NEVER operate near open flames. JCB-G8000PE Instruction & User Manual... - Page 5 • Never operate the machines near other machines which use flammable liquids as a fuel source. • Only use the machine outside far away from open windows, doors and vents. JCB-G8000PE Instruction & User Manual...
-
Page 6: Safety Information
ALL MAINTENANCE other than that listed in this manual, should be carried out by professionally trained and • certified personnel. When using this machine for the first time and before actual work, you MUST learn how to handle the machine • from an experienced or skilled person. JCB-G8000PE Instruction & User Manual... -
Page 7: Personal Safety
The operator or user must take all necessary precautions to ensure their own safety and that of others, especially on slopes or rough, slippery and unstable ground. JCB-G8000PE Instruction & User Manual... -
Page 8: Inspect Your Machine
Keep the machine in good operating condition. Operating the machine in poor or questionable condition could • result in serious injury. Be sure all safety devices are in working order and warning labels are in place. These items are installed for your • safety. JCB-G8000PE Instruction & User Manual... -
Page 9: Work Area & Machine Specific Safety
Machine Specific Safety Never Use the machine in wet conditions • This machine is powered by flammable fuel which can result in a fire or explosion, causing serious injury. • JCB-G8000PE Instruction & User Manual... -
Page 10: Fuel Safety & Spilled Fuel
When fuel is spilled on yourself or your clothes, wash your skin and change clothes immediately. • ALWAYS clean up spills promptly using absorbent granules and a lidded bin. • JCB-G8000PE Instruction & User Manual... -
Page 11: Fuelling/De-Fuelling & Storage
(such as a water heater, furnace, or clothes dryer). Allow the engine to cool before storing in any enclosure. Replace all fuel tank and container caps securely and wipe up spilled fuel. Never operate the unit without the • fuel cap securely in place. JCB-G8000PE Instruction & User Manual... -
Page 12: Features
Features JCB-G8000PE Instruction & User Manual... -
Page 13: Feature Descriptions
M – Choke Valve – Adjusts the amount of air flowing through the carburettor N – Spark Plug – Provides spark for combustion. O – Carburettor – Mixes Fuel air for combustion. P – Cylinder Head Q – Exhaust – Muffles the noise from the exhaust. JCB-G8000PE Instruction & User Manual... -
Page 14: Assembly
> Line up the holes in the Handle with the corresponding holes in the generator frame. > Insert the thread bolts through the bars into the holes in the generator frame. JCB-G8000PE Instruction & User Manual... -
Page 15: Pre-Operation Checks
This type of damage is not Turn Air Filter Cover Retainer and covered by the Distributor’s Limited Remove Air Filter Cover and Element Warranty. JCB-G8000PE Instruction & User Manual... -
Page 16: Check Fuel Level & Recommended Fuel
Petrol/Gasoline is highly flammable, volatile and corrosive. You can be burned or seriously injured when handling fuel. NEVER fill above the Maximum Fuel Level. Maximum Fuel Level Recommended Fuel Type Standard grade E10 and E5 available at fuel stations is suitable for this machine. JCB-G8000PE Instruction & User Manual... -
Page 17: Electrical Unloading
Connect the battery by connecting the Red Wire to the Positive + terminal, and the Black wire to the Negative -. NEVER allow these 2 wires to touch each other as it can cause damage to the machine and battery. JCB-G8000PE Instruction & User Manual... -
Page 18: Operation
To start a cold engine, move the choke lever to the CHOKE position. To restart a warm engine, leave the choke lever in the RUN position. > Put the Engine Switch in the “ON” position Fuel Valve Choke Lever Engine Switch JCB-G8000PE Instruction & User Manual... -
Page 19: Starting
> The output of the generator is based on Full engine speed. Ensure the choke lever is fully located in the RUN position to ensure full engine speed. Recoil Starter Grip Choke Lever JCB-G8000PE Instruction & User Manual... -
Page 20: Stopping
Put the Engine Switch into the Off Position > Turn the fuel valve to the OFF position. NOTE* The machine is very hot after usage. Allow the machine to cool down before moving. Engine Switch Fuel Valve JCB-G8000PE Instruction & User Manual... -
Page 21: Connecting Appliances
Connecting Appliances The JCB-G3600P has a rated power of 3200W. This is the maximum amount of power the machine can supply, anything over this will cause the machine to stall, and operate outside of stated specification. This can be dangerous and cause damage to your machine. -
Page 22: Power Management
The Starting Power of some appliances is higher than the Rated Power. Keep this in mind when adding additional appliances to your machine. When starting your appliance, always consider it’s Starting Power additionally to any load you’re currently requesting JCB-G8000PE Instruction & User Manual... -
Page 23: Maintenance
Carbon monoxide poisoning from engine exhaust. Be sure there is adequate ventilation whenever you operate the engine. －Burns from hot parts. Let the engine and exhaust system cool before touching. －Injury from moving parts. JCB-G8000PE Instruction & User Manual... -
Page 24: Maintenance Schedule
(1) - Maintenance should be carried out more frequently if used in dusty conditions (2) - Before carrying out maintenance, please seek advice from a qualified technician or the after sales team. For contact details, please see contact us page 32 JCB-G8000PE Instruction & User Manual... -
Page 25: Oil Servicing
SJ, SL, or equivalent. SAE 15W-40 is recommended for general use. Other viscosities shown in the chart may be used when the average temperature in your area is within the indicated range. JCB-G8000PE Instruction & User Manual... -
Page 26: Spark Plug
After properly seated, fully tighten using spark plug wrench. > When the washer has started to compress tighten to the following instruction: 1. New Sparkplug – a 1/2 Turn tight 2. Re-used Spark Plug – a 1/8 to 1/4 Turn tight JCB-G8000PE Instruction & User Manual... -
Page 27: Sediment Filter
Wash the foam element in liquid detergent and water, then rinse in clean water and squeeze dry in a clean cloth. > Saturate the foam filter with clean engine oil, remove excess by squeezing into a dry clean cloth. > Refit the air filter and air filter cover. JCB-G8000PE Instruction & User Manual... -
Page 28: Troubleshooting
Choose appropriate engine The engine oil type is incorrect oil model Clean or Replace Spark The spark plug fails Plug The Power Decreases over time The valve clearance are out of Adjust the Valve Clearances adjustment JCB-G8000PE Instruction & User Manual... -
Page 29: Wiring Diagram
Wiring Diagram JCB-G8000PE Instruction & User Manual... -
Page 30: Specification
Specifications Model JCB-G8000PE Running Watts/Kw 7500/7.5 Max. Watts / kw 7900/7.9 Rated Voltage (v) 115/230 Rated Frequency(Hz) Displacement (cc) Recoil/E-Start Start method 1100 Oil capacity (mm) Metal Air Cleaner Type Low Oil Sensor / Alarm T.C.I Ignition System Brushed Alternator Type... -
Page 31: Warranty, Manual Updates, Returns, Reviews & Spare Parts
We reserve the right to make any modifications without prior notice whenever necessary. Our latest manuals are also placed online. All our manuals can be downloaded at: www.jcb-tools.co.uk Returning Your Product If you are returning your product, please contact the dealer for their returns policy. -
Page 32: Contact Us
Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687 880 Email aftersales@genpower.co.uk Post Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW. Support Website Go to Go to www.jcb-tools.co.uk JCB-G8000PE Instruction & User Manual... -
Page 33: Recycling And Disposal & Environmental Protection
> You must comply with local regulations for the disposal of waste materials after mowing. > When disposing, do not pollute the environment with the machine, but hand it over to a disposal centre, in accordance with the local laws in force. JCB-G8000PE Instruction & User Manual... -
Page 34: Ce Declaration Of Conformity
The person authorized to compile this technical file: Date: 01/12/2022 Signature Name/ title: Roland.J.Llewellin / Managing Director JCB Tools are a Licensee of J.C.Bamford Excavators ltd, operated via Genpower ltd. Address: JCB Tools, Isaac Way, Pembroke Dock, SA72 4RW JCB-G8000PE... -
Page 35: Ukca Declaration Of Conformity
The person authorized to compile this technical file: Date: 01/12/2022 Signature Name/ title: Roland.J.Llewellin / Managing Director JCB Tools are a Licensee of J.C.Bamford Excavators ltd, operated via Genpower ltd. Address: JCB Tools, Isaac Way, Pembroke Dock, SA72 4RW JCB-G8000PE Instruction & User Manual...
Need help?
Do you have a question about the JCB-G8000PE and is the answer not in the manual?
Questions and answers