Motorola RM Series User Manual page 24

68012009071-BD
Chapter 5: Radio Programming through CPS
Chapter 5
Radio Programming through CPS
You can program or change features on your radios by using the Customer Programming Software (CPS)
and the CPS Programming Cable.
CPS is available for free as web based downloadable software at http://motorolasolutions.com/RMseries.
5.1
Advanced Configuration Mode
Advanced Configuration mode allows you to configure additional features through the radio front panel.
NOTE: For non-display model radios, the navigation is guided by Voice Announcement.
Advanced Configuration mode allows you to customize the following features:
● Frequency Selection
● Codes (CTCSS/DPL)
● Auto-Scan
● Active Channels
Table 11: Advanced Configuration Mode Feature Customization
Feature
Frequency Selection
Codes (CTCSS/DPL)
Auto-Scan
Active Channels
5.1.1
Entering Advanced Configuration Mode
Advanced Configuration mode allows you to configure special settings in your radio without the need of a
computer.
Prerequisites: Ensure your radio is set to the channel you want to program. You can set the channel
before entering the Advanced Configuration mode or at any time during the Advanced Configuration mode by
pressing the SB2 button until you reach the desired channel.
24
Description
Allows you to choose frequencies from a pre-de-
fined list.
Minimize interference by providing combinations of
codes that filter out static, noise, and unwanted
messages.
To set a particular channel to automatically enable
Scan each time you switch to that channel.
Increase or decrease the amount of active chan-
nels in the range of maximum channels allowed.