Advertisement
[
~g!
I Q
~-~-1~_D_~-~N_:J_E s_N~_s_r_EM-IN_s_P_E_c_rl_o_N_A_N_o
_ _ _
-nu~~~~{
%
13.6±0.8 mm
(0.54±0.03
in)
3-8
Ball joint adjustment steps:
•Disconnect the cable joint G) from the
ball joint@.
•Loosen the lock nut @.
•Turn the barrel for adjusting.
Tum in
Increase the clearance ®
Tum out
Increase the clearance
@
•Tighten the lock nut.
X
Lock nut:
3 Nm (0.3 m·kg, 2.2 ft·lb)
•Connect the cable joint.
it.
WARNING
The cable joint must be screwed in more
than 12.8 mm (0.5 in).
If correct adjustment by using the cable
joint at the handlebar end is impossible,
adjust the cable joint on the steering nozzle·
end.
Advertisement
