Your Warming Drawer is designed to utilise the heated glass base and rear fan in differing
heat levels and durations to provide optimal performance. Each function has a default time
and temperature setting that illuminates upon selection. These settings can be customised
by manually adjusting the duration and temperature controls in place of a pre-set function.
FUNCTIONS
CUPS
Heat circulates from the heated glass base
Heat is circulated for 30 minutes.
z
Heating duration depends on material and
z
thickness of the cups including quantity, height
and arrangement.
Do not place any cups and/or glasses in front of
z
the ventilation slots. This will block the airflow
and cause uneven heating.
PLATES
Heat circulates from the heated glass base
Heat is circulated for 45 minutes.
z
Heating duration depends on material and
z
thickness of the plates including quantity, height
and arrangement.
Do not place any large plates in front of the
z
ventilation slots. This will block the airflow and
cause uneven heating.
WARM
Heat circulates from the heated glass base
and rear fan
Preheat the drawer for at least 15 minutes
z
before use.
Heat is produced for 60 minutes.
z
Provides constant low heat to keep cooked
z
food hot.
Do not overfill the drawer to avoid spillage.
z
Cover the food with a heat-resistant lid or
aluminum foil to prevent food from drying out.
This function is not suitable for reheating
z
refrigerated food.
11