Advertisement
Quick Links
SUMAKE
Specification:
Free Type
Standard Nozzle
Option Nozzle
Capacity Of Cup
Air Consumption
Air Inlet (NPS)
Air Hose (NPS)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
HVLP Air Gravity Spray Gun
W/Regulator W/O Cup
SS-1201SR
Gravity
1.5 mm
1.3mm, 1.4mm, 1.7mm,
1.9mm, 2.0mm, 2.2mm
2.5mm
0.6 L
7 CFM (198 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
29psi (2 kg/cm²) (2Bar)
1.54 lbs (0.7 kg)
PNEUMATIC TOOLS
Noise and Vibration:
Vibration
0.095 m/s²
Uncertainty
K= 1.5 m/s
Noise
Sound Pressure Level
: 80.6 dB(A)
Sound power level
: 91.6 dB(A)
Uncertainty
²
K= 3dB
SS-1201SR-S-1512D-GW
Remark
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
hearing!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sumake SS-1201SR
Summary of Contents for Sumake SS-1201SR
- Page 1 Uncertainty Uncertainty Air Hose (NPS) 3/8” (10 mm) hearing! ² K= 1.5 m/s K= 3dB Air Pressure 29psi (2 kg/cm²) (2Bar) Net Weight 1.54 lbs (0.7 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 SS-1201SR-S-1512D-GW...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： HVLP AIR GRAVITY SPRAY GUN W/REGULATOR, W/O CUP Model/ Serial No.： SS-1201SR to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ... - Page 3 Application: SUMAKE spray guns for spraying various paints are used in a wide range of applications and processes. Designed for superior finish performance, reduce overspray, ergonomic comfort and increase productivity. Placing the tool in service: Always use clean, dry air at recommend air pressure at the inlet. Higher pressure may result in hazardous situations.
- Page 4 SS-1201(R) HVLP AIR GRAVITY SPRAY GUN (W/REGULATOR) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 1201-01 Air Cap 1201-14 Knob, Fluid Control 1201-02A Fluid Nozzle 1.3 1201-15 Air Piston 1201-02B Fluid Nozzle 1.4 1201-16 Air Piston Spring 1201-02C Fluid Nozzle 1.5 1201-17 Gasket...
-
Page 5: Spray Gun
SPRAY GUN Original instructions SUMAKE Industrial Co. Ltd. - Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 Safety precautions for repetitive motions hazards 1. When using the tool, the operator may experience discomfort in the hands, arms, shoulders, neck, or other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture. Maintain secure footing and avoid awkward or off-balanced postures.
- Page 8 General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary. Twist Teflon thread tape to ensure a proper seal air inlet. Then tighten the air coupler into air tool. The supplied compressed air must be clean and dry, with the appropriate oil mist.
Need help?
Do you have a question about the SS-1201SR and is the answer not in the manual?
Questions and answers