Connecting To Your Amplifier: Bridged (Mono) Operation - MC2 Audio E Series Operating Instructions Manual

E Series – E45 Operating Instructions

Connecting To Your Amplifier: Bridged (Mono) Operation

Use the centre Speakon connector marked Bridge/Stereo, and depress the button between
the XLR connectors to the "Channel Link [A]" position.
Connect the speaker as follows:
When operating in bridged more, the minimum impedances are doubled.
The minimum load in bridged mode is 4 Ohms.
Pin 1-: Cold (A)
Pin 2+: Hot (B)
Page 13