Health Mate renew mate Owner's Manual page 10

step 6: top panel
1. Set the top panel onto the sauna.
2. There is a cable emerging from the small square opening
at the back of the top panel. Plug the "LAMP" cable into the
open socket on the back panel. *It is possible to plug the
connection in upside down. Make sure the shape of the
plugs are aligned with the shape of the sockets.
3. Put the other magnetic wooden cover over the
connections.
a. installation & maintenance
4. Attach the door handle to the door by threading the bolt
through the hole in the door. Making sure that the raw wood
half of the handle is attached on the "inside" of the sauna,
connect the two hales by twisting them together until snug.
10