Advertisement
Product Use or Instructions
Lighting
Using firewood
1. Make sure there is no ash in the bottom of fire bowl.
2. Start by placing dry kindling and small wood pieces in the fire bowl.
Note: Do not overfill with wood that covers or extends above the top air holes.
3. Use a match to light kindling or small wood pieces.
4. As the ember bed gets hotter, start adding in 1-3 pieces of wood.
As those catch, add enough wood to fill the fire bowl.
Firewood placement #1
Inner tube installed
Firewood placement #2
Inner tube installed
Using wood pellets
1. Make sure there is no ash in the bottom of fire bowl.
2. Place 100% natural hardwood pellets in the fire bowl, and put
kindling or a natural fire starter on to the pellets.
Note: Do not overfill with pellets that covers or extends above the
top air holes.
Max usage: 33 LB, Min usage: 11 LB
3. Ignite the kindling or fire starter to allow the fire to start.
4. If you need to add pellets, it is recommended to add near the end
of fire burning, and add pellets by batches, each time 1.1 ~ 2.2 lbs is appropriate.
Extinguishing
1. Allow fire to burn itself out.
2. DO NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fire pit.
Inner tube not installed
Inner tube not installed
Page 9 of 11
Advertisement
