Element ERT21CSCW User Manual page 21

Operating Instructions
Refrigerator and Freezer setting
• Press and hold the temperature setting button
freezer compartment indicator light is on, the freezer temperature can be adjusted.
• Press and hold the temperature setting button
the refrigeration compartment.
• Each time the temperature setting button A is pressed once,the temperature setting
changes one time.
• After the temperature setting has been completed, the refrigerator will run
according to the set value after 15s.the order is as follows:
Note: The temperature of each gear is within 35°Fof the set temperature, and the actual
situation is slightly different according to the load situation.
Fault indication
• The following warnings appearing on the display indicate corresponding faults
of the refrigerator. Though the refrigerator may still have refrigerator and freezing
function with the following faults, the user should contact maintenance specialist for
maintenance, so as to ensure normal use of the refrigerator.
Fault Code
Shelf humidity control
• The movement of the paddle to the middle is wet, and the movement of the
paddle to both sides is dry.
Display fault code in the event of a failure (Loop display); display the set gear of the
refrigeration room in the event of trouble-free.
Under normal circumstances, the current set gear is displayed, and when a "fault
code visible" class failure occurs, the fault code is displayed.
Refrigerator temperature sensor faults
Freezing frost sensor faults
Ambient temperature sensor faults
Freezer temperature sensor faults
21
for 3 seconds, when the
again for 3 seconds to switch to
Fault Description