Pair With Bluetooth Devices; Uninstall Drivers - TP-Link Archer TBE550E User Manual

Chapter 3
2. Select your Wi-Fi network, click Connect, and enter the password when
prompted.
Note: To connect to a 6GHz, check the following:
1. Make sure the 6 GHz band is not prohibited by regulations in your country.
2. Make sure your router or access point supports 6 GHz Wi-Fi.
3. The 6 GHz band requires operating system support. Make sure you are using the Windows 11.
4. Make sure the Wi-Fi driver is successfully installed according to the Quick Installation Guide.
Note: If you want to update your operating system, refer to
3. 3.

Pair with Bluetooth Devices

1. Right click the
Note: If it's not displayed, refer to
2. Select Add a Bluetooth Device
3. Select your Bluetooth device from the list and follow the on-screen
instructions to complete pairing.
Note: Make sure your device's Bluetooth is enabled and discoverable.
3. 4.

Uninstall Drivers

• Uninstall Wi-Fi driver
Go to Start > Apps, find the Wi-Fi driver
on it and select Uninstall, then follow the on-screen instructions to complete the
uninstallation.
• Uninstall Bluetooth driver
Go to Start > Apps, find the Bluetooth driver
Driver. Click on it and select Uninstall, then follow the on-screen instructions to
complete the uninstallation.
TP-Link_XXXX
Secured
Network settings
(Bluetooth) icon on the taskbar.
Troubleshooting-T4.
to scan for available devices.
Connect
Troubleshooting-T7.
TP-Link Archer TBE550E
TP-Link Archer TBE550E Bluetooth
Use Your Adapter
Driver. Click
12