Mitsubishi Electric PUZ-SM100VKA2 Service Manual page 104

14-5. FUNCTION SETTING
14-5-1. PAR-41MAA
1. Select ˝Service˝ from the Main menu, and press the [
Select ˝Setting˝ from the Service menu, and press the [
Select ˝Function setting˝, and press the [
2. Set the indoor unit refrigerant addresses and unit numbers with the F1
through F4 buttons, and then press the [
setting.
3. When data collection from the indoor units is completed, the current settings
appears highlighted. Non-highlighted items indicate that no function settings
are made. Screen appearance varies depending on the "Unit No." setting.
<The display format and the setting method vary with indoor units.>
Pattern 1
4. Use the F1 or F2 button to move the cursor to select the mode number, and
change the setting number with the F3 or F4 button.
5. When the settings are completed, press the [
data from the remote controller to the indoor units.
6. When the transmission is successfully completed, the screen will return to the
Function setting screen.
OCH774A
] button.
] button.
] button.
] button to confirm the current
] button to send the setting
104
Settings menu
Function setting
Rotation setting
Service menu:
F1 F2 F3 F4
Function setting
Ref. address
Grp. (1/4)
Mode 1
1/2/3
Mode 2
1/2/3
Mode 3
1/2/3
Mode 4
1/2/3
Select:
Cursor Cursor
F1 F2 F3 F4
Function setting
Ref. address
Unit#1 (1/4)
Mode 7
1/2/3
Mode 8
1/2/3
Mode 9
1/2/3
Mode10
1/2/3
Select:
Cursor Cursor
Function setting
Ref. address
Sending data
F1 F2 F3 F4