How To Update The Firmware; Technical Specifications - FDS MLED-3C User Manual

MLED-CTRL Box

7. How to update the firmware

Updating the MLED-CTRL box firmware is relatively simple.
For this operation you will need to use the software "FdsFirmwareUpdate".
a) Disconnect power from the MLED-CTRL Box
Install the program "FdsFirmwareUpdate" on your computer
b)
c) Connect the RS232
d) Run the program "FdsFirmwareUpdate"
e) Select the COM Port
f) Select the update file (.bin)
g) Press Start on the program
h) Connect the power cable to MLED-CTRL Box
MLED module firmware can also be updated via the MLED-CTRL Box using the same procedure.
Firmware and apps can be found on our website:

8. Technical specifications

Power supply
Radio frequencies & Power :
Europe
India
North America
Inputs precision
Operating temperature
Time drift
Bluetooth module
Dimensions
Weight
December 2021 - Version EN 1.2
www.fdstiming.com
https://fdstiming.com/download/
12V-24V (+/- 10%)
869.4 - 869.65 MHz
865 - 867 MHz
920 - 924 MHz
1/10'000 sec
-20°C to 60°C
1ppm @ 20°C; max 2.5ppm from -20°C to 60°C
BLE 5
160x65x35mm
280gr
User manual
100mW
100mW
100mW