FDS MLED-3C User Manual page 10

MLED-CTRL Box
Mode Settings (Time / Temperature & Date Mode)
- DATA TO DISP
- TEMP UNITS
- TIME COLOR
- DATE COLOR
- TEMP COLOR
- TOD HOLD COLOR
- TOD HOLD TIME
- SYNCHRO
- EXIT
Mode Settings (Start/Finish Mode)
- DISP HOLDING TIME
- COLOR
- TIME FORMAT
- INPUTS SEQUENCE
- INPUT 1 FCN
- INPUT 2 FCN
- PRINT SETTINGS
- PRINT RESULTS
- EXIT
Mode Settings (Speed Mode)
- DISTANCE
- DISTANCE UNITS
- SPEED UNITS
- DISP HOLDING TIME
- COLOR
- INPUTS SEQUENCE
- INPUT 1 FCN
- INPUT 2 FCN
- PRINT SETTINGS
- PRINT SPEEDS
- EXIT
Mode Settings (Counter Mode)
- DUAL COUNTER
- COUNTER SEQUENCE
- INITIAL VALUE
- COUNTER PREFIX
- LEADING 0
- PREFIX COLOR
- COUNTER 1 COLOR
- COUNTER 2 COLOR
- EXIT
December 2021 - Version EN 1.2
www.fdstiming.com
(Select what to display : temp, time, date)
(Change the temperature unit °C or °F)
(Color of the Time value)
(Color of the Date)
(Color of the Temperature)
(Color of the Time value when on hold by input 2)
(Set the TOD holing duration)
(Re Synchronize the clock – Manual or GPS)
(Leave the menu)
(set the time the information is displayed. 0 = always displayed)
(Color of Running time and result)
(Format of the time displayed)
(Select the inputs sequence mode : Standard / Any Inputs)
(Function of Input 1 : Std input / Auxiliary FCN 1 / Auxiliary FCN 2)
(Function of Input 2 : Std input / Auxiliary FCN 1 / Auxiliary FCN 2)
(Print the settings if RS232 Protocol is set to Printer)
(Print the time result if RS232 Protocol is set to Printer)
(Leave the menu)
(Set the distance)
(Select the distance unit – meters or feet)
(Select the speed unit – Km/h, Mph, m/s or Knots)
(set the time the result is displayed. 0 = always displayed)
(Color of the speed value)
(Select the inputs sequence mode : Standard / Any Inputs)
(Function of Input 1 : Std input / Auxiliary FCN 1 / Auxiliary FCN 2)
(Function of Input 2 : Std input / Auxiliary FCN 1 / Auxiliary FCN 2)
(Print the settings if RS232 Protocol is set to Printer)
(Print the time result if RS232 Protocol is set to Printer)
(Leave the menu)
(selection between 1 and 2 counters)
(counting sequence : 0-9999, 0-999, 0-99, 0-15-30-45, 0-1-2-X )
(Initial counter value after reset)
(Prefix displayed before the counter – 4 digits max)
(Leave or remove the leading '0')
(Color of the prefix)
(Color of the counter 1)
(Color of the counter 2)
(Leave the menu)
User manual