Factory Settings - FDS MLED-3C User Manual

MLED-CTRL Box
4. WIRC / WINP /WISG
WIRC, WINP or WISG can be used to send impulses in modes "Start-Finish", "Speed trap",
"Counter", "Count-Down". In order to be recognized by the MLED-CTRL Box, a pairing must be
performed either via the Menu Buttons or via our setup Apps.
Important:
Do not use a same WIRC/WINP/WISG on a Display and a TBox simultaneously.

4.1. Factory settings

Factory settings can be restored by pressing both Menu Buttons on MLED-CTRL during power
up.
- All parameters will be reset to default.
- Bluetooth password will be reset to "0000"
- Bluetooth will be activated if previously disabled
- Bluetooth will enter DFU mode (for a firmware maintenance)
Once reset completed, power will have to be recycled (OFF/ON) in order to resume normal
operation.
December 2021 - Version EN 1.2
www.fdstiming.com
User manual