MLED-CTRL Box
Color Overlay:
Command
^cs c^
Text Color at position:
Command
^cp s e c^
Traffic lights (Filled):
Command
^tf p c^
December 2021 - Version EN 1.2
www.fdstiming.com
Description
Color overlay
cs = start color overlay cmd
c = color code
Example A:
<STX>13Welcome ^cs 2^FDS^cs 0^Timing<LF>
"Welcome" and "Timing" are in the default line color
"FDS" is in Green
Example B:
<STX>23^cs 3^Colour^cs 4^ Display<LF>
"Color" is in Blue
"Display" is in Yellow
Color overlay is only applied in the current received frame.
Description
Set color overlay between two characters position (permanent)
cp = cmd
s = first character position <1 .. 32>
e = last character position <1 .. 32>
c = color code
Example:
<STX>13^cp 1 10 2^^cp 11 16 3^ <LF>
Characters position 1 to 10 are defined in Green
Characters position 11 to 16 are defined in Blue
This setting is saved in non-volatile memory, and is applied to all
following received frame.
Description
Display a filled traffic light at a defined position
tf = cmd
p = position on the display starting from the left (1 .. 9)
c = color code
Example:
<STX>13^tf 1 2^^tf 2 1^ <LF>
Display a green and a red traffic Light on the left of the display.
!!! The rest of the display is not modified
User manual