Can Bus; Ctrl I/O Connector - Cherry RINGNECK SOM-PX30-uQ7 User Manual

3.17 CAN Bus

The board provides a CAN connector on the bottom row.
Fig. 3.16: CAN header
Note: CAN feature is only available on RINGNECK SOM-PX30-uQ7 module with an STM32, see (Section 12.4.4
Companion Controller 1).

3.18 CTRL I/O Connector

The board provides signals for watchdog trigger in- and output, SoM PMIC power-on input, reset and external
display power enable.
Fig. 3.17: CTRL I/O header
RINGNECK SOM-PX30-uQ7 User Manual v1.3.1
© Cherry Embedded Solutions GmbH Page 17