Page 1
Linea V Design cordless phone (M350) Design cordless phone with answering machine (M355) Extended user documentation Register your product and get support at www.philips.com/support...
Contents 1 Important safety instructions 6 Text and numbers Enter text and numbers Switch between uppercase 2 Your phone and lowercase What is in the box Overview of the phone 7 Phonebook Overview of the base station View the phonebook Search a record 3 Get started Call from the phonebook...
Page 4
10 Phone settings 16 Notice Sound settings Declaration of conformity ECO+ mode Use GAP standard compliance Name the handset Compliance with EMF Set the date and time Disposal of your old product Set the display language and battery Auto answer Activate/Deactivate auto hang 17 Frequently asked questions 18 Appendix...
1 Important • Metallic objects may be retained if placed near or on the handset receiver. safety • Do not use the product in places where there are explosive hazards. • Do not open the handset, base station or instructions charger as you could be exposed to high voltages.
2 Your phone Line cord* Congratulations on your purchase and welcome to Philips! To fully bene t from the support that Philips o ers, register your product at www.philips.com/welcome. Guarantee What is in the box Quick start guide Note •...
temporarily disable or enable Overview of the phone the call screening. • End the call. • Exit the menu/operation. • Press and hold to switch the handset on or o . • Scroll down on the menu. • Decrease the earpiece/speaker volume.
external call during a Overview of the base conference call. station • Press and hold to make an intercom call in standby mode (for multi-handset version only). • Make and receive calls. • Recall key (This function is network dependent.) m MENU/OK •...
3 Get started Connect each end of the power adapter to: • the micro USB socket at the bottom of the base station; • the power socket on the wall. Connect each end of the line cord Caution • Make sure that you have read the safety •...
Note Caution • • For the minimum requirement of the power Risk of explosion! Keep batteries away from bank, see the chapter “Technical Data”. heat, sunshine or re. Never discard batteries • While using a power bank as an alternative in re.
To reset the language, see the Change the remote following steps. access PIN code (for Select MENU/OK > [Phone setup] > M355) [Language], then press MENU/OK to con rm. Select a language, then press Note MENU/OK to con rm. • The default answering machine remote »...
Display icons Note • Charge the batteries for 8 hours before rst use. In standby mode, the icons shown on • If the handset becomes warm when the the main screen tell you what features batteries are being charged, it is normal. are available on your handset.
the battery or move the handset The alarm is activated. nearer to the base station. Answering machine (M355 only): it ashes when there is Note a new message or when the memory is full. It is displayed • When ECO+ is on, the signal strength is not displayed.
4 Calls Note • The talk time of your current call is displayed on the call timer. • If you hear warning tones, the phone is Note almost out of battery or out of range. Charge the battery or move the phone close to the •...
End a call Make a second call You can end a call in these ways: Note • Press • This service is network dependent. • Place the handset to the base station or charging cradle. Press during a call. » The rst call is put on hold. Note Dial the second number.
Make a conference call with the external callers Note • This service is network and country dependent. Check with the service provider for additional charges. When you are connected to two calls, press , then » The two calls are combined and a conference call is established.
5 Intercom and While you are on the phone conference You can go from one handset to another during a call: calls Press and hold » The current caller is put on hold. » For multi-handset versions, the An intercom call is a call to another handsets available for intercom handset that shares the same base are displayed, then go to step...
Page 18
are displayed, then go to step » For two-handset versions, the other handset rings, then go to step 3. Select a handset, then press MENU/OK to con rm. » The selected handset rings. Press on the selected handset. » The intercom is established. Press MENU/OK.
6 Text and numbers You can enter text and numbers for handset name, phonebook records, and other menu items. Enter text and numbers Press once or several times on the alphanumeric key to enter the selected character. Press REDIAL/C to delete a character.
7 Phonebook • Enter the rst character of the contact. Scroll the contact list This phone has a phonebook that stores up to 50 records. You can Press or press MENU/OK > access the phonebook from the base [Phonebook] > [View] to access the station.
Add a record Delete a record Note Press MENU/OK. • Select [Phonebook] > [Delete], If your phonebook memory is full, a noti cation message is displayed on the then press MENU/OK to con rm. handset. Delete some records to add new Select a contact, then press ones.
8 Call log Call list type You can set whether you can view all The call log stores the call history incoming calls or missed calls from of all missed or received calls. The this menu. incoming call history includes the name and number of the caller, call Note time and date.
Save a call record to the Delete all call records phonebook Press » The incoming call log is Press » The incoming call log is displayed. displayed. Press MENU/OK to enter the options menu. Select a record, then press MENU/OK to con rm. Select [Delete all], then press MENU/OK to con rm.
9 Redial list Delete a redial record Press REDIAL/C to enter the list of The redial list stores the call history dialed calls. of dialed calls. It includes the names Select a record, then press and/or numbers you have called. MENU/OK to con rm.
10 Phone Set the handset’s ringtone for external calls settings You can select from 10 ringtones. Press MENU/OK. Select [Phone setup] > [Sounds] You can customize the settings to > [Ringtone ext.], then press make it your own phone. MENU/OK to con rm. Select a ringtone, then press Sound settings MENU/OK to con rm.
Set the battery tone Name the handset Battery tone is the sound made The name of the handset can be up when the battery is low and needs to 12 characters. It is displayed on the recharging. handset screen in standby mode. Press MENU/OK.
you pick up the handset. When you deactivate this feature, you have to press to answer the incoming call. Press MENU/OK. Select [Phone setup] > [Auto answer], then press MENU/OK to con rm. Select [On]/[O ], then press MENU/OK to con rm. »...
11 Alarm clock Your phone has a built-in alarm clock. Check the information below to set your alarm clock. Set the alarm Press MENU/OK. Select [Alarm], then press MENU/OK to con rm. Select [On once] or [On daily], then press MENU/OK to con rm. Enter an alarm time, then press MENU/OK to con rm.
12 Privacy mode Add new numbers to the call barring list Press MENU/OK. You can access the privacy mode Select [Privacy mode], then press menu to block outgoing and incoming MENU/OK to con rm. calls. Enter the privacy mode PIN/passcode. The default PIN is Call barring (block 0000.
Page 30
Change the privacy Note mode PIN/passcode • When a call is blocked, the ringer is muted. The call is still displayed and logged. The Press MENU/OK. telephone answering machine will still answer the call when enabled. Select [Privacy mode], then press •...
13 Telephone Note answering • [Answer only] means the answering machine is on. Calls are only answered, messages are not recorded. machine • [Answer & rec.] means the answering machine is on. Calls are answered and messages are recorded. • When the answering machine is switched on, it answers incoming calls after a certain Note...
Record an announcement Listen to the announcement The maximum length of the Press MENU/OK > [Answer announcement you can record is machine]. 3 minutes. The newly recorded Select [Announcement], then press announcement automatically replaces MENU/OK to con rm. the old one. Select [Answer only] or [Answer Press MENU/OK >...
the LED at the back of the handset Skip to the next message. ashes. Delete the current message. Stop listening to the message. Note • If you pick up the phone when the caller leaves a message, the recording stops and you can talk to the caller directly.
Press MENU/OK > [Answer machine] > Remote access [HS screening] > [On]/[O ], then press MENU/OK to con rm. You can operate your answering machine when you are away from When the call screening function is home. Simply make a call to your activated, you can: phone with a touch tone phone and •...
Page 35
Access the answering machine Switch the answering machine remotely (not available when you listen to the messages). Make a call to your home number with a touch tone phone. Enter # when you hear the announcement. Enter your PIN code. »...
14 Services Activate/Deactivate auto conference Press MENU/OK. The phone supports a number of Select [Services] > [Conference], features that help you handle and then press MENU/OK to con rm. manage the calls. Select [Auto]/[O ], then press MENU/OK to con rm. Call list type »...
your phone changes the number to with di erent countries. For details, 12503338888 when it dials out. consult your service provider. Press MENU/OK. Note Select [Services] > [Recall time], then press MENU/OK to con rm. • The maximum length of a detect number is 10 digits.
> [Register], then press Auto clock MENU/OK. Press and hold on the base Note station for 10 seconds. • This service is network dependent. Enter the system PIN. Press • Make sure you have subscribed to the caller REDIAL/C to make corrections. ID service before you use this feature.
Unregister handsets If two or more handsets share the same base station, you can unregister the handset or other handsets. Press MENU/OK. Select [Services] > [Unregister], then press MENU/OK to con rm. Enter the system PIN. (The preset PIN is 0000). Press REDIAL/C to remove the number.
Page 42
When this logo is attached to a product, it means a nancial contribution has been paid to the associated national recovery and recycling system. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (bu er) and polyethylene (bags, protective foam...
17 Frequently The range is short. How can I improve asked The range is subject to environmental factors, like electrical devices or walls questions in between. • Move the base station to another corner/room. • Move the base station away from My handset displays [Searching] or other electrical appliances nearby [Unavailable], or [Unregistered], what...
Page 44
The handset loses connection with The handset on the charger does not the base or the sound interrupts charge or the battery discharges too during a call. fast. • The handset is nearly out of range. • Make sure the batteries are Move it closer to the base station.
Page 45
Bad audio (crackles, echo, etc.) • The handset is nearly out of range. Move it closer to the base station. • The phone receives interference from the nearby electrical appliances. Move the base station away from them. • The phone is at a location with thick walls.