Inventini PASCAL BALL User Manual page 8

REPAIR
8
1. Block the pump valve in the OPEN position.
2. To remove the air from the product, you can:
• use the pump in ‚pump out' mode. When you remove the air from the
product using a pump, there is no need to block the valve in the
OPEN position as the pump does it automatically. Anyway, by doing
it you will fasten the process of removing the air.
• do it manually by blocking the pump valve in the OPEN position.
3. Detach the ropes or / and remove the anchors.
4. Detach the cover from the plate.
5. If the ball has lighting unplug and remove the wires. Unplug the power supply.
6. Unfold the stand components. Remove the outer foot screws of the stand base.
7. Pack product into the transport bags.
A small hole can be repaired by using repair kit - glue and foil.
If the product foil is damaged:
1. Locate the damage.
2. Degrease the surface.
3. Apply the adhesive to the hole, taking care that the adhesive does
not get inside the product.
4. Apply the foil patch.
5. Wait 60 minutes for the adhesive to fully bond.
There is a possibility of sending the product back to the manufacturer.
We offer paid service for mechanical damage.
DISASSEMBLY
DAMAGE
PASCAL BALL ASSEMBLY INSTRUCTIONS