Safety Rules; General Terms Of Warranty - Inventini PASCAL BALL User Manual

SAFETY RULES

RECOMMENDATIONS
CAUTION
GENERAL TERMS
OF WARRANTY
6
1. Inflatable ball is not adapted to severe weather conditions such
as strong winds, heavy rains, storms or hailstorms.
2. In case of strong winds, disassemble the ball.
3. You shouldn't leave your ball unattended.
4. Keep the ball away from sources of heat and open flames. Please
do not place any sources of heat direclty at the ball beacuse the
materials can melt at high temperatures.
5. By special order, you can have your ball made of flame retardant
fabric (which meets the standards of B1 requirements).
1. Read these instructions carefully before you get to work.
2. Be cautious while setting up the ball to avoid being hurt and prevent
other damage.
3. Before disassembling the structure, the ball must be thoroughly
cleaned. Any spots or stains on the fabric should be removed
immediately with a warm damp cloth. Do not use pressure washers.
Follow the instructions on the label.
4. Storing a dirty or damp ball can result in a breakdown of
the materials as fabrics tend to mold, mildew and/or rot. Before
putting your ball in its transport bag for storage, make sure
it is clean and dry. Store it in a dry place to avoid moisture
contamination. In case of bad weather, repack your ball to avoid
damage, but as soon as it's possible, unpack it once again to let it dry.
5. With recurring gusts of wind, check anchoring systematically.
6. Do not block the safety valves in any case.
7. Only use the pump supplied by the manufacturer to pump the product.
The use of other pumps risks damaging the product.
The air in the product changes it's volume under the influence
of temperature. High temperature increases the volume of air.
The product becomes more taut. Low temperature reduces the volume
of air. The product becomes less taut.
General terms of warranty can be downloaded from the
manufacturer's website.
PASCAL BALL ASSEMBLY INSTRUCTIONS