Sony KP-46C36 Service Manual page 48
Color rear video projector
Hide thumbs
Also See for KP-46C36:
- Operating instructions manual (84 pages) ,
- Supplementary manual (1 page) ,
- Service manual (88 pages)
Table of Contents
Advertisement
EQUIPMENT
| MEASUREMENT | ADJUSTMENT
ILLUSTRATION AND SHAPE
ADJUSTMENT ITEM AND PROCEDURE
AND SIGNAL
POSITION
LOCATION
AND NUMBER
AGC ADJUSTMENT
1. Receive an off-air signal.
2. Adjust the AGC VR ( TU 1001 ) so that there is no snow noise
and cross-modulation.
WHITE BALANCE ADJUSTMENT
1. Receive the monoscope pattern signal and adjust the picture | Monoscope pattern
PICTURE
;
a d
eocees yng, Soy
ee ra wegt She
ETRE SAE matey Aire ot
Fs
eects minimun
quality with the menu.
<RGB MENU>
2. Adjust service mode SBRT so that the signal 10 IRE section
RGB SBRT
barely glows.
3. Receive the all-white pattern signal.
4. Adjust the white balance with service mode GCUT and BCUT.
5. Adjust service mode SBRT so that the signal 100 IRE section
barely glows.
RGB GCUT
RGB BCUT
All White pattern
PICTURE
6. Adjust the white balance with service mode GDRV and BDRV.|
fF
acne minimun
7. Repeatedly adjust the white balance for the minimum and
RGB
GDRV
maximum picture settings.
RGB
BDRV
PICTURE
snbaiecase maximum
Advertisement
Table of Contents
