ELECTRICAL ADJUSTMENT BY REMOTE COMMANDER
By using Remote Commander (RM-Y 136A), all circuit adjustments can be made.
NOTE : Test Equipment Required.
1. Pattern Generator
2. Frequency counter
3. Digital multimeter
4. Audio oscillator
1. METHOD OF SETTING THE SERVICE ADJUSTMENT MODE
SERVICE MODE PROCEDURE
1. Standby mode. (Power off)
2. [DISPLAY] [5]
> [VOL _(+)| > [TV POWER]
on the Remote Commander.
( (+]}— [5 | — we) — C) )
(Press each button within a second.)
SERVICE MODE ADJUSTMENT
Category
Adjustment item
. The CRT displays the item being adjusted.
. Press [1] or [4] on the Remote Commander to select the adjustment item.
. Press [3] or [6] on the Remote Commander to change the data.
. Press [2] or [5] on the Remote Commander to select the category.
. If you want to recover the latest values press {7 J then
to read the memory.
: Press[MUTING] then
to write into memory.
on
NO
SW
SERVICE ADJUSTMENT MODE MEMORY
MUTING|
WRITE
SERVICE
L
0000 0
ENTER
8. Press [8 |then [ENTER| on the Remote Commander to initialize.
9. Turn set off and on to exit.
2. MEMORY WRITE CONFIRMATION METHOD
1. After adjustment, remove the plug from AC outlet, and then replace the plug in AC
outlet again.
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again and confirm they were adjusted.