Sony KP-46C36 Service Manual page 41

GREEN HORIZONTAL SIZE ADJUSTMENT
1. Adjust with GH MSIZE so that the sizes of both ends and of
both sides of the center section of the screen are equal
2. Adjust with GH SIZE so that the horizontal sizes of both ends
and of both sides of the center section of the screen are equal.
3. While tracking, adjust with GH MSIZ and GH SIZE so that the
lattice intervals for the horizontal line section of the center
section of the screen are equal and so that the horizontal size is
the prescribed value.
4. If M LIN is changed when the GH MSIZ and GH SIZE
adjustment is complete, adjust again while tracking
EQUIPMENT | MEASUREMENT | ADJUSTMENT ILLUSTRATION AND SHAPE
ADJUSTMENT ITEM AND PROCEDURE AND SIGNAL POSITION LOCATION AND NUMBER
@With just the H SIZE adjustment in MAIN, if there is no need to
adjust GH SIZE in SUB this can save power.
GREEN VERTICAL LINEARITY ADJUSTMENT
1. Adjust GV LIN so that the vertical lines at the top and bottom
of the screen are symmetrical.
<RG-GH MENU>
GH MSIZ
—fr
*.
= |.
MSIZ | (2
| SIZE
'| <
GH SIZE
<RG-GV MENU>
GV LIN