Table of Contents
Advertisement
IMPORTANT SAFETY GUIDELINES
• Do not exceed maximum recommended number of sheets when feeding paper
into shredder.
• Always unplug the shredder before cleaning the waste bin.
• Unplug the shredder if not in use for extended periods of time.
• Keep ties, jewelry, hair, etc. away from the shredder feed opening to ensure
personal safety.
• Avoid touching the feed opening with hands.
• Keep aerosol products away from shredder as these can damage motor.
• Do not place near heat sources or in humid environment for extended periods of
time.
• Place shredder far away from areas frequented by children and pets.
• Product is not intended for use by children (product is not a toy.)
OPERATION
Read and follow all safety instructions before using the shredder. Your shredder
can operate in either Auto-Feed Mode or Manual Feed Mode. The auto-feed slot
can shred up to 60 sheets of paper at a time, whereas the manual feed can handle
up to 6 sheets of standard paper at one time (or one credit card at a time).
Manual Feed Mode:
1. Slide the function switch to the AUTO position.
2. Put up to 6 sheets of paper into the manual paper feed opening and your
shredder will switch on automatically.
3. To shred credit cards and small receipts make sure to insert them into feed
opening by the area marked with the credit card icon. Only shred one credit
card at a time
4. After shredding is completed, slide the function switch back to the OFF
position.
Auto-Feed Mode:
1. Slide the function switch to the AUTO position.
2. Insert up to 60 sheets of paper into the auto-feed tray.
3. Make sure to remove all staples and paper clips prior to shredding as this may
cause your shredder to jam. Only paper should be shredded through the auto-
feed tray.
4. Once paper is inserted into the feed tray, the motor will turn on. After several
seconds, the shredding process will automatically begin, shredding 2-3 sheets
of paper at a time until the feed tray is empty.
5. As soon as all the paper in the auto feed tray is shredded, the unit will go back
into standby mode.
6. After shredding is completed, slide the function switch back to the OFF
position.
2
Advertisement
Table of Contents
