Table of Contents
Advertisement
IMPORTANT SAFETY GUIDELINES
• Do not exceed maximum recommended number of sheets when feeding paper
into shredder.
• Do not put paper clips or staples into shredder to avoid damaging the blades.
• Always unplug the shredder before cleaning the waste bin.
• Unplug the shredder if not in use for extended periods of time.
• Keep ties, jewelry, hair, etc. away from the shredder feed opening to insure
personal safety.
• Avoid touching the feed opening with hands.
• Keep aerosol products away from shredder as these can damage motor.
• Do not place near heat sources or in humid environment for extended periods of time.
• Place shredder far away from areas frequented by children and pets.
• Product is not intended for use by children (product is not a toy).
OPERATION
Read and follow all safety instructions before using the shredder.
Your shredder can operate in either Auto-Feed Mode or Manual Feed Mode. The
auto-feed slot can shred up to 60 sheets of paper at a time, whereas the manual
feed can handle up to 6 sheets of standard paper at one time.
Manual Feed Mode:
1. Slide the function switch to the AUTO position.
2. Put up to 6 sheets of paper into the manual paper feed opening and your
shredder will switch on automatically.
3. To shred credit cards and small receipts make sure to insert them into feed
opening by the area marked with the credit card icon.
4. After shredding is completed, slide the function switch back to the OFF
position.
Auto-Feed Mode:
1. Slide the function switch to the AUTO position.
2. Insert up to 60 sheets of paper into the auto-feed tray.
3. Make sure to remove all staples and paper clips prior to shredding as this may
cause your shredder to jam. Only paper should be shredded through the auto-
feed tray.
4. Once paper is inserted into the auto-feed tray, the shredder will automatically
start operating and begin the shredding process. It will take approximately 2-3
sheets at a time, until all the paper in the feed tray is shredded.
5. Your shredder will continue to shred approximately 2-3 sheets at a time, until
all the paper in the feed tray is shredded.
6. As soon as all the paper in the auto feed tray is shredded, the unit will go back
into standby mode.
7. After shredding is completed, slide the function switch back to the OFF
position.
2
Advertisement
Table of Contents
