Advertisement
IMPORTANT SAFETY GUIDELINES
• Do not exceed maximum recommended number of sheets when feeding paper
into shredder.
• Always unplug the shredder before cleaning the waste bin.
• Unplug the shredder if not in use for extended periods of time.
• Keep ties, jewelry, hair, etc. away from the shredder feed opening to ensure
personal safety.
• Avoid touching the feed opening with hands.
• Keep aerosol products away from shredder as these can damage motor.
• Do not place near heat sources or in humid environment for extended periods of time.
• Place shredder far away from areas frequented by children and pets.
• Product is not intended for use by children (product is not a toy).
• Shredder will perform better if staples and clips are removed from paper before
shredding. Over time, shredding of staples and clips will reduce the life of the
shredder blades.
OPERATION
Read and follow all safety instructions before using the shredder.
1. Make sure that the waste bin is fully inserted.
2. Insert the power cord into electrical outlet.
3. Locate the Power Switch on the back of the unit and switch to the On (|)
position.
4. Press the On/Off ( ) button on top of the shredder, putting shredder in standby
mode.
5. Insert paper or credit card into feed opening and shredder will begin shredding.
6. Once paper or credit card has cleared the head, shredder will return to
standby mode.
Your shredder is equipped with four castor wheels that allow you to easily move
the shredder around your home or office. You can lock the wheels in place by
pressing down on the lock tabs built into each wheel. When you are ready to move
the shredder, simply lift the lock tabs to unlock the wheels.
EMPTY WASTE BIN
1. Remove the waste bin by sliding the bin out of the shredder.
2. Empty the waste bin.
3. Return the waste bin by sliding it back into the shredder.
CLEARING PAPER JAMS
1. Push the REV (<) button.
2. Shredder will rotate in opposite direction expelling any jammed paper out top of
shredder head.
3. Once the paper has been cleared, press the FWD (>) button to continue
shredding.
4. Reduce the number of sheets to be shredded at one time.
OVERHEAT PROTECTION
1. Frequent or continuous use may cause motor to exceed normal operating
2. After approximately 10 minutes of continuous operation, the overheat
protection feature causes motor to shut off.
3. Unplug the shredder power cord from the electrical outlet and allow shredder
motor to cool (approximately 60 minutes to completely cool).
4. Once the motor has cooled it will return to normal operation.
2
temperature.
Advertisement
