FiT DISPLAY COMPACT Instruction Manual page 43

INSTRUCTION MANUAL
Error code Error message displayed
12-0A Remote charger pairing error
12-0B Remote lock pairing error
13-xx Remote internal error
14-xx Remote configuration error
15-01 Remote motor pairing error
15-02 Remote display pairing error
15-03, 15-04, Remote battery pairing error
15-05, 15-06
15-07 Remote speed node pairing error
15-08 Remote gears pairing error
FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023
FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION
Action / Restriction
1. Restart the system.
2. Switch the system off.
3. Disconnect the charger from the system and
socket.
4. Wait until status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Reconnect the charger to the socket.
7. Reconnect the charger to the system and start
the system.
8. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Re-insert the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Remove the battery from the holder, check
contacts and clean if necessary.
4. Re-insert the battery and start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
43