Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sunny Health & Fitness SF-X7300
Summary of Contents for Sunny Health & Fitness SF-X7300
- Page 1 PREMIUM STEPPER STAIR CLIMBER SF-X7300 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. - Page 3 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using (this appliance). DANGER – To reduce the risk of electric shock and the injury from moving parts: Always unplug this appliance from the electrical outlet immediately after using and before cleaning or servicing.
-
Page 4: Pre-Assembly Check List
PRE-ASSEMBLY CHECK LIST Before you start to assemble, please make sure all parts are included. Description Spec. Qty. Description Spec. Qty. Right Exterior Decorative Main Frame Cover Left Interior Decorative Left Support Column Cover Right Interior Decorative Right Support Column Cover Left Handrail Console... -
Page 5: Hardware Package
HARDWARE PACKAGE Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: ✓ The model number (found on cover of manual) ✓ The product name (found on cover of manual) ✓... - Page 6 ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 1: Fig. 1 We recommend having two people to do the assembly. Open the carton and remove contents.
- Page 7 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 3: Thread the Switch Lower Wire 1 (No. 107) through the Right Decorative Cover (No.
- Page 8 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 4: Connect the 2 Pulse Extension Wires 2 (No. 112) with the 2 Pulse Extension Wires 1 (No.
- Page 9 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 5: Buckle the Left and Right Decorative Covers (No. 41L & No. 41R) on the Main Frame (No.
- Page 10 We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669). STEP 6: Connect 2 Pulse Lower Wires (No. 113) with 2 Pulse Extension Wires 2 (No. 112), connect Key Board Extension Wires 2 A (No.
-
Page 11: Adjustment Guide
HOW TO MOVE THE STAIR CLIMBER WARNING: Machine is very heavy, please make sure there is adequate amount of people to help move the machine. First, remove Pedal (No. 40). Then hold the Handlebar (No. D) of Main Frame (No. 1) and tilt the stair climber until the Transportation Wheels (No. -
Page 12: Grounding Instructions
GROUNDING INSTRUCTIONS WARNING: This stair climber requires a power source of 1A (120V) to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before powering the equipment. Any power source above or below this level could cause significant damage to the equipment and/or user. -
Page 13: The Display Console
THE DISPLAY CONSOLE 1. WINDOW DISPLAY 1) “TIME/STEPS” window: Displays time duration or number of steps and will alternate every 5 seconds. When the time duration is displayed, the range is from 0:00 to 99:59. Once the time reaches 99:59, the stair climber will slow down smoothly until it comes to a complete stop. In goal mode, the time will countdown from the set time to zero. - Page 14 2) "HEIGHT GOAL/CALORIES GOAL/TIME GOAL" is the countdown mode for the selected goal. Use the TIME GOAL key to enter time countdown mode. Use the HEIGHT GOAL to enter height countdown mode. Use the CALORIES GOAL key to enter calories countdown mode. You can quickly set countdown parameters with the "+/-"...
- Page 15 5. MANUAL MODE 1) Manual mode is the default mode when the stair climber is powered on. The MAIN window will display floor progress and the level window will display the default level “1”. 2) Press the “START/PAUSE” key, the stair climber will start to climb at the initial speed of level 1 after a 3-seconds countdown.
-
Page 16: Program Schedule
8. PROGRAM SPECIFICATION PROGRAM SCHEDULE Program 9. CUSTOM PROGRAM In addition to the built-in programs, the stair climber also has 3 custom programs U01, U02 and U03 for users to set their own training program. Each program will have 20 segments. 1) In standby state, press the "CUSTOM"... -
Page 17: Body Mass Index
2) Press the “OK” key to confirm the time setting and enter to set the speed level for each segment. “HEIGHT/PROG” window will flash S01 for the 1st segment. Press "LEVEL LEVEL ” key, "+/-" or number keypad keys to set the speed level and press “OK” key to confirm. -
Page 18: Power Saving Mode
stair climber will go back to the standby state, waiting input instructions. 13. POWER SAVING MODE This console has a power saving function. In the standby state, if there is no key input for 10 minutes, the console will enter power saving mode, and automatically closes the display. Press any key to wake the system. -
Page 19: Exploded Diagram
EXPLODED DIAGRAM 1... - Page 20 EXPLODED DIAGRAM 2...
-
Page 21: Parts List
PARTS LIST Description Specification Qty. Description Specification Qty. Main Frame Bearing 6004 Left Support Pedestal Bearing KP005 Column Right Support Brake Combination Column Left Handrail Left Protective Cover 1309X1133X202 Right Handrail Right Protective Cover 1309X1133X202 Left Inner Protective 1005.6X1091X47 Front Handrail Cover Console Support Right Inner Protective... - Page 22 Specificatio Description Specification Qty. Description Qty. Wear Washer Φ15X4.7 Outer Snap Ring Φ20 Pedal 1 501X245X52.5 Outer Snap Ring Φ8 Pedal 2 490X126.7X20 E-Shaped Snap Ring Φ7 Decorative Cover 275.7X146.6X70.4 Internal Serrated Washer Φ10X1.2 Bottom Baffle 870X690X3.0 Internal Serrated Washer Φ8X1.2 Middle Baffle 1025.6X554X28...