Table of Contents
Advertisement
en Appliance care
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
Iron Dry and, at the
2.
same time, turn the programme
selector to position 2.
The display shows the current
a
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 37
To change the value, press
4.
Ready In .
To save the changes, switch off
5.
the appliance.
Appliance care
16 Appliance care
The appliance offers cleaning pro-
Appliance care
grammes for basic and intensive ap-
pliance care.
16.1 Preparing for appliance
care
Preparing the appliance for the
appliance care programme
Prepare the appliance before running
the appliance care programme.
38
Requirements
The drum is empty.
¡
The appliance is switched off.
¡
Clean the fluff filter.
1.
→ "Cleaning the fluff filter",
Page 31
Pull out the condensation con-
2.
tainer horizontally and empty it.
→ "Emptying the condensation
container", Page 33
Preparing the condensation
container for the appliance care
programme
If you are draining the condensation
water from the appliance using the
drain hose, prepare the condensation
container before running the appli-
ance care programme.
Remove the stopper from the re-
1.
cess in the top.
Insert the stopper on the under-
2.
side.
Advertisement
Table of Contents
