Changing The Basic Set- Tings; Appliance Care; Preparing For Appliance Care; Calling Up The Appliance Care Programme - Siemens WT47URH00W User Manual And Installation Instructions

Table of Contents

Advertisement

en Appliance care
16.2 Changing the basic set-
tings
To call up the basic settings,
1.
press
静音 .
a The display shows the selected ba-
sic setting and the current value.
Select the required basic setting.
2.
To change the value, press
3.
.
To save the changes, switch off
4.
the appliance.
17 Appliance care
The appliance offers cleaning pro-
grammes for basic and intensive ap-
pliance care.
17.1 Preparing for appliance
care
Preparing the appliance for the
appliance care programme
Prepare the appliance before running
the appliance care programme.
Requirements
¡ The drum is empty.
¡ The appliance is switched off.
Clean the fluff filter.
1.
→ "Cleaning the fluff filter",
Page 31
Pull out the condensation con-
2.
tainer horizontally and empty it.
→ "Emptying the condensation
container", Page 33
40
Preparing the condensation
container for the appliance care
programme
If you are draining the condensation
water from the appliance using the
drain hose, prepare the condensation
container before running the appli-
ance care programme.
Remove the stopper from the re-
 /
1.
cess in the top.
Insert the stopper on the under-
2.
side.
Clean the filter in the condensation
3.
container.
17.2 Calling up the appliance
care programme
Requirement: The appliance care
programme is ready.
→ "Preparing for appliance care",
Page 40
Press
1.
.

Advertisement

Table of Contents
loading

Table of Contents