Table of Contents
Advertisement
16.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
Drying Aim and, at
2.
the same time, turn the pro-
gramme selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
To change the value, press
4.
To save the changes, switch off
5.
the appliance.
17 Appliance care
17.1 Preparing the appliance
for the appliance care
programme
The appliance must be prepared be-
fore basic or intensive appliance care
is carried out.
Requirement: The base unit is
cleaned.
→ "Cleaning the base unit",
Page 46.
Remove the laundry.
1.
Close the appliance door.
2.
Pull out the condensation con-
3.
tainer, keeping it level.
.
Empty the condensation container
4.
→ Page 31.
Appliance care en
39
Advertisement
Table of Contents
