Starting The Engine - Yamaha ZUMA 125 2020 Owner's Manual

Operation and important riding points
1000 km (600 mi) and beyond
Avoid prolonged full-throttle operation.
Vary the engine speed occasionally.
NOTICE
If any engine trouble should occur
during the engine break-in period,
immediately have a Yamaha dealer
check the vehicle.

Starting the engine

The ignition circuit cut-off system will
enable starting when the sidestand is
ECA10271
be up.
To start the engine
1. Turn the main switch on and set
the engine stop switch to the run
position.
2. Confirm the indicator and warning
light(s) come on for a few seconds,
and the go off. (See page 4-3.)
TIP
Do not start the engine if the engine
trouble warning light remains on.
NOTICE
Do not continue to operate the vehi-
cle if a warning light remains on.
Have a Yamaha dealer check the ve-
hicle.
3. Close the throttle completely.
4. While applying the front or rear
brake, push the start switch.
5. Release the start switch when the
engine starts, or after 5 seconds.
Wait 10 seconds before pressing
the switch again to allow battery
voltage to restore.
NOTICE
For maximum engine life, never ac-
celerate hard when the engine is
cold!
6-2
EAU86730
1
2
3
4
5
ECA26710
6
7
8
9
10
ECA11043
11
12
13
14