Kenwood TS-790A Instruction Manual page 39

4-4-6. Memory Channel Recall
channel.
2. Select a Memory Channel by using the TUNING
knob.
3. If you press the VFO/M key again, the original VFO
operating information will be restored.
4-4-7, Memory Channel Scroll
a Memory Channel Frequency without changing or
loosing the current receive frequency.
4. To clear Memory Scroll operation, press the CLEAR
key or the M.IN key again.
4-4-8. Transferring Memory Information to the VFO.
The following procedure transfers the contents of the
Memory Channel to the VFO without erasing the con-
tents of the memory channel.
2. Select the desired Memory Channel by using the
TUNING knob.
3. Press the MP V key. The contents of the Memory
Channel will be transferred to the VFO and opera-
tion changes to the VFO mode.
If you transfer the contents of one of the Split Fre-
quency Memory Channels to the VFO, the trans-
ceiver will automatically select the SPLIT mode.
Notes: -- ~
2. If nothing is stored in the selected Memory Chan-
nel, only the channel number is displayed; no trans-
fer is carried out.
4-4-9. Transferring memory information between
Memory Channels.
The following procedure transfers the contents of one
1. In the VFO mode, press the VFO/M key to select
Memory Channel mode. This returns the Memory
Channel to the status, (mode, and frequency) pri-
or to the VFO operation.
5. When the desired Memory Channel is found and
displayed, press the M.IN key again. The current
frequency,
mode and antenna
number
will be
stored, the Memory Scroll mode will be cancelled.
Notes: ~ -
described below.
39