Kenwood TS-790A Instruction Manual page 36

B. Split Memory Channel
1, Select the receive frequency and the mode.
Example:
4 VFO
USB 495. '088
auTo
2. Press the A=B key and then press the A/B key.
vFO B
475 (GaE
AUTO
3. Select the transmit frequency.
Example:
¥FO 8
449S5.°888 USB
Auto
4. Press the A/B key.
AIB
¥
» YEO
usa
495.1888
| auTO
5. Press the M.IN key.
o
fu McH a
a (4S aad
AUTO WSCA
(When 145.000 MHz is stored in Memory Channei 03.)
6. Select the desired Memory Channel number.
SPUT M.CH A
73
M.ScR
36
7. When the desired memory channel is found and dis-
played, press the M.IN key again. The current fre-
quency and mode will be stored, the Memory Scroll
mode will be cancelled, and the TS-790A/790E will
return to the operating mode and frequency that
was displayed before the M.IN key was pressed ini-
tially.
OE)
ESI
AVEO.
USB 12 rman
995 (8898
AUTO
C. Programed Scan Memory Channel
1. Select the lowest operating frequency and the
mode.
Example:
FM AFD.
(45 eae
AUTO
2. Press the A=B key and then press the A/B key.
Mm v0 B
PYgged
aura
3. Select the highest operating frequency.
fM ¥FO.B
ip aon
t y Sg to tye
AUTO
4. Press the A/B key.
AUTO