Manual Tuning - Pioneer KEH-M7300 Owner's Manual

Preset Scan Tuning
This function lets you automatically monitor the stations
assigned to the preset buttons.
1. Press the button ©, and "SCAN" @ will light up and the pre-
set number @ flash.
Each station assigned to the buttons in Bank @ will be auto-
matically tuned in for about eight seconds.
2. When you hear a station that you like, press button ® again
to cancel preset scan tuning and remain at that station.
BSM (Best Stations Memory)
This function automatically locates stronger stations and auto-
matically assigns their frequencies to the buttons in Bank @,
from strongest to weakest. It comes in handy when trying to
find local stations while driving.
1. Press button ® and select a band.
2. Hold down button @. After about two seconds, a "beep" will
sound to signal that the BSM search has started. At this time,
"BSM" will flash on the display.
12
e You can cancel BSM search by pressing button @.
Manual Tuning
Use manual tuning when stations are too weak to be picked up
by seek tuning.
1. Press both (+) and (-) sides of button @ at the same time to
clear "SEEK" ©.
2. Each press of the (+) side of button @ increases the frequen-
cy in 50 kHz steps in the FM band, 9 kHz in the MW band and
1 kHz in the LW band. Pressing the (-) side of button @
decreases the frequency. Holding down either side of button
@ changes the frequency at high speed.