Advertisement
Audio Adjust
Dual Mono / Mono
Dolby
DTS/IMAX
Volume
Source
Input Volume Absorber
Name Edit
Audio Select
Hardware
HDMI
Bluetooth
Power Management
Miscellaneous
Tuner
Firmware Update
Initial Setup
Lock
Factory Reset
Change the settings of multiplex audio playback.
Change the setting of when Dolby signals are input.
Change the setting of when DTS signals are input.
Change the Volume settings.
Adjust the volume level when there are differences in volume level among multiple devices
connected to this unit.
Set an easy name for each input.
Select the priority for input selection when multiple audio sources are connected to one input
selector.
Change the settings of the HDMI function.
Change the settings for the Bluetooth function.
Change the settings for the power-save function.
Change the settings for Tuner.
Change the settings for Firmware Update.
Make the initial setup from the setup menu.
Lock the Setup menu so that the settings cannot be changed.
All the settings are restored to factory defaults.
Setup
p82
p82
p83
p84
p85
p85
p86
p87
p89
p90
p91
p92
p92
p92
p92
71
Advertisement
