Advertisement
AV Adjust
You can quickly set convenient features such as adjusting sound quality.
AV Adjust
HDMI
Sound Delay
Audio
Audio Return Channel
Room EQ
Level
You can make the settings on the TV screen while playing something. Press
AV ADJUST on the remote controller to display the "AV Adjust" menu.
Select the item with the cursor
/
and press ENTER to confirm your selection.
Use the cursors to change the settings.
• To return to the previous screen, press
• To exit the settings, press
AV ADJUST.
Note
• When the input signals are ones that need a high bandwidth, such as 8K
signals, the "AV Adjust" may not be displayed.
BD/DVD
UP/DOWN buttons of the remote controller
RETURN/EXIT.
„ HDMI
Sound Delay:
If the video is behind the audio, you can delay the audio to offset
the gap. Different settings can be set for each input selector.
Audio Return Channel:
You can enjoy the sound of the HDMI-connected ARC-
compatible TV through the speakers connected to the unit. Select "On" when
listening to the audio of TV using the speakers of this unit. Select "Off" when the
ARC function is not used.
„ Audio
Sound Retriever:
Improve the quality of the compressed audio. Playback sound
of lossy compressed files such as MP3 will be improved. The setting can be
separately set to each input selector. The setting is effective in the signals of
48 kHz or less. The setting is not effective in the bitstream signals.
• It cannot be set if the listening mode is Direct or Pure Direct.
Midnight:
Make small sounds easily heard. It is useful when you need to reduce
the volume while watching a movie late night.
• It cannot be set if the listening mode is Direct or Pure Direct.
• The setting cannot be used in the following cases.
– If "Loudness Management" is set to "Off" when playing Dolby Digital Plus
or Dolby TrueHD
– When the input signal is DTS:X and "Dialog Control" is other than 0 dB
Playback
64
Advertisement
