Advertisement
(*1) A center speaker or surround speakers need to be installed.
(*2) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected.
(*3) If the input format is any of the following and the number of channels is monaural, this listening mode becomes unavailable.
– DTS, DTS 96/24, DTS Express, DTS-HD HR, DTS-HD MSTR, PCM
(*4) Surround speakers or height speakers need to be installed.
(*5) A center speaker, surround speakers, or height speakers need to be installed.
(*6) Cannot be selected if "Speaker Virtualizer" ( →p79) is set to "Off".
(*7) Cannot be selected when the "IMAX Mode" ( →p83) is set to "Off" (the default value is Auto).
(*8) This cannot be selected when the input format is DTS Express.
(*9) Cannot be selected when the input format is monaural.
(*10) The listening mode displayed depends on the speaker layout ( →p108). Furthermore, when the setting for "Speaker Virtualizer" ( →p79) is "Off" (the default
value is On), then modes other than
(*11) Can only be selected when the "IMAX Mode" ( →p83) is set to "Off" (the default value is Auto).
(*12) Displayed as "DTS" on this unit.
(*13) Displayed as "DTS-HD" on this unit.
Atmos and Dolby Surr cannot be selected.
‰ Speaker Layouts and Selectable Listening
Modes ( →p108)
Appendix
113
Advertisement
