Victory VBC-175/POD Specifications

Blast C C hill/Storage R R efrigerator
Large foodservice operations benefit from
chilling capacity of 175, 220, and 350 lbs of
food product to +38°F in about 90 minutes.

Refrigeration System

Cabinets require single remote condensing
unit or equivalent to support operation. A
remote indoor/outdoor condensing unit is
available from the factory or third party
suppliers. Consult price list for selections.
The self-contained top mounted refrigeration
system allows for use as a +38°F storage
refrigerator. Expansion and solenoid valves
standard. An external drain is required near
the back, side or front of the cabinet for the
condensate water .
Controls
Unique E-Z Blast™ 1-2-3 microprocessor
control panel initiates blast cycles in three
simple steps. Model features built-in alarms
and can control the chilling process with the
temperature probes or a digital timer, which
can be programmed with two preset chilling
times for specific food products. The controller
supports a la carte style blast chilling.
HACCP Data Logger System records, stores
and prints temperature data for up to 7 days
in accordance with HACCP guidelines. Its
Approvals:
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com
Remote Roll-In Blast Chiller
VBC MODELS —
Model shown with optional
insulated floor and ramp.
V V B B C C - - 1 1 7 7 5 5
built-in thermal printer provides simplified
documentation and HACCP record keeping.
May be used with optional NAFEM Data
Protocol compliant documentation software
for HACCP monitoring to transfer data from
kitchen to a remote Windows® compatible
computer system. Program is available from
the factory and many third-party suppliers.
Cabinet
Exterior is heavy gauge stainless steel front,
back, sides and door. Galvanized steel top.
Interior is heavy gauge stainless steel with
radius corners. 3" of environmentally
friendly ODP Zero Polyurethane foam injected
insulation throughout the cabinet ensures the
ultimate in energy efficiency.
Doors
Door is hinged right and cannot be site reversed.
Standard with flush recessed handle, hydraulic
closer, magnetic gasket, heater and self-closing
hinges with a 90° "stay open" feature.
Construction
Roll-in Blast Chillers are made from walk-in
type cam-lock panels and are delivered
knocked down for ease of installation. Panel
assembly is required on site.
Project:
Location:
Item #:
Quantity:
VBC-175
VBC-220
VBC-350

Standard Features

• Two Operational Functions:
- Blast Chill Processing Refrigerator
- +38°F Storage Refrigerator
• E-Z Blast™ Microprocessor Control Panel:
- Blast Chill Cycle Controlled Automatically by
Either Food Probe or Digital Timer
•Two (2) Preset Chill Times: 90, 240 Minutes
•Soft Chill and Hard Chill Options
•Three (3) Food Probes with Digital
Temperature Indication
- Cabinet Temperature Digital Display
- Food Temperature Digital Display
- Defrost Mode Indicator
- On/Off, Blast Chill Cycle and Cancel Buttons
- Diagnostic Trouble hooting Capability
• High and Low Temperature Alarm
• Power and Component Failure Alarms
• HACCP Data Logger System Records, Stores
and Prints Temperature Data up to 7 Days
- After Termination of Chill Mode
- After Cancellation of Chill Mode
- Daily at Midnight
- Seven (7) Day History on Demand
- Built-In Thermal Printer
• Compartment Accepts One (1) Roll-in Cart
27" Wide x 40" Deep x 7 " High
• Complies with FDA, NSF 7 and HACCP
Guidelines
• Defrost on Demand or Automatic Defrost
• Environmentally Friendly R-134a Refrigerant
• 3"of Environmentally Friendly ODP Zero
Polyurethane Foam Injected Insulation
Optional Features and Accessories
• Reverse Door Hinging
Customer Order)
• Roll-thru (Specify Door Hinging)
• Indoor/Outdoor Condensing Units
• Insulated Floors (Adds 3
• Extra Wide Doors for Combi Racks
• Stainless Steel Floor Ramps
• Stainless Steel Roll-In Rack (Single Section)
• HACCP Monitoring
• Extra Printer Paper
Roll-In Rack
Stainless steel removable rack guides protect
wall panels from damage. Optional racks are
available from the factory. Maximum rack size is
27" wide x 40" deep x 7 " high exterior
dimensions including casters.
Victory Refrigeration specification sheets
www.victoryrefrigeration.com.
s
s
3
(Must be requested per
/ " to Height)
1
2
3
are available online at