Save, Load, And Reset The Settings - Ganz ZN-AIBOX-STD/PRO User Manual

4. Drag the exclusion zone to move it.
5. Drag the vertex of the exclusion zone box to change the size of the zone.
6. Double-click or right-click the exclusion zone to delete it.
※Caution
It is recommended that the exclusion area is as small as possible to prevent actual objects from
being filtered out by the exclusion area settings.
Even if the exclusion zone does not cover the entire object, the object is excluded if its center is
within the exclusion zone.

2.2 Save, Load, And Reset the Settings

1. Save : Click the
size information of the filter setting.
2. Load : Click the
filter that is set on that channel.
3. Reset : Click the
the filter settings for that channel.
button at the bottom of the screen to save the position and
button to load the most recently saved information of the
button at the bottom left of the screen to delete and reset
37