Screen After Settings Applied; Initial Access Settings - Ganz ZN-AIBOX-STD/PRO User Manual

•
Change IP address: Click the 'Change IP address' button to commit the changes to the
device
o After a short period, the list will update, and the new network configuration will
be listed
o Please confirm that the new network configuration is correct
•
Double click the device information in the list above to open the device setting page

2.4 Screen after settings applied

•
After a while, by pressing the Apply button, the network setting of the device will be updated in
the list.
If the network settings have not been changed, it is due to ID or Password being
o
incorrect, please check again.
•
After setting the network, double-click the device information in the list to access the ZN-AIBOX-
STD/PRO .
The ZN-AIBOX-STD/PRO webpage will open in the default browser in Windows.
o

3. Initial access settings

When accessing the AI Bridge for the first time, the initial setting wizard is displayed.
To use the AI Bridge, complete the setup in the order shown in the UI.
10