Counting Zone Setting - Ganz ZN-AIBOX-STD/PRO User Manual

3.2.5 Counting Zone Setting

1. Select the video you want to count from the Select Video dropdown in the top right
corner.
2. The counting area can be set using the functions below.
•
Drag the vertex to move it
•
Click the yellow line to add a new vertex at that point
•
Right-click the vertex to remove it
•
Drag the gray box to move the label position
3. Click the
entrance and exit the same as above to count the whole passengers.
•
Zone Name : Enter the name of this zone.
•
Counting Zone : Select the direction of people passing by needed to count as an event
3.2.6 Schedule settings (optional)
You can reset the counter at times when there are no people in the target space, such as at night
or during non-business hours.
You can set up a wipe schedule as a daily, weekly, or monthly wipe. You can also add multiple
wipe schedules.
1. Click the
2. Add a schedule to drive action when an event occurs. Please refer to the 'Schedule
Setting Guide' for more information on how to set up a schedule.
button to save after setting each option. Set the counting zone to every
button to set the event action schedule.
27