5.3 Support rear plate mounting
•
After selecting the installation location, drill the holes on the wall, and the holes aperture should be suitable for the M6
x 50 type expansion bolt. This data can be obtained from the technical parameters of the expansion bolt. Fixing the
installation rear plate to the wall with the expansion bolt. Torque parameters of bolt can be obtained through technical
parameters.
•
After installing the rear plate, check to ensure it is properly secured and not loose.
5.4 Mounting bracket installation
Locate the mounting brackets and fixing screws included in the charger package. Refer to the provided images for the installation
instructions.
Support rear plate
Installation schematic diagram of the support rear plate
Installation Schematic diagram of the support hanging ear
Rear plate install size
A
B
C
D
A
B
C
17
Expansion bolt
Support rear plate
Fixing hole
Wall installation hole
Charger main body cover
Locating pin
Mounting bracket