Table of Contents
Advertisement
4
Cleaing and maintenance
C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
4.1 Cleaning of aluminum grease
filter
Aluminum grease filter is used to retain the parti-
cles in the air. Aluminum grease filter may change
colour after repeated cleaning. This is normal, and
you do not have to replace your filters.
1
(Figure 2)
1. External aluminium grease filter
2. Internal aluminium grease filter
• Pull the sliding plate out by holding the front
panel. Remove the external aluminium grease
filter first, and then the internal aluminium
grease filter .
• Push the aluminium grease filter lock forward.
• Then lower it slightly down and pull it out (Fig-
ure 2). Otherwise, you can bend the filter. Wash
and rinse aluminium grease filter s with liquid
detergent and replace aluminium grease filter
s to their sockets by by carrying out the steps
specified above in reverse order. This filter retain
the particles in the air.
C
You may also wash the aluminum
grease filter in the washing ma-
chine.
Cooker Hood / User Manual
A
CAUTION: In case of normal use,
clean your aluminum grease filter
once in a month.
4.2
Carbon filter
1. Put the charcoal filter foam on the back of the
outer aluminium cassette filter.
2
2. Use an iron wire to insert in the side of alumi-
nium filter and press the charcoal filter foam.
3. Use other three iron wires in the same method
to press the charcoal filter foam flat. (4 pcs
iron wires for BRH60TW), (5 pcs iron wires for
BRH90TW)
4. The same method is used to install the charcoal
filter foam for inner aluminium filter with same
quantity of iron wires.
11 / EN
Advertisement
Table of Contents
