BMW 2 GRAN COUPE Series Manual page 72

CONTROLS
Bluetooth connection
Functional requirements
▷ Compatible device with Bluetooth interface.
Compatible devices, refer to page 70.
▷ The vehicle key is in the vehicle.
▷ The device is ready for operation.
▷ Bluetooth is switched on in the vehicle and
on the device.
▷ The pairing readiness is displayed on the
control display.
▷ Bluetooth default settings such as for visi-
bility may be required on device, refer to
your device operating instructions.
Activate Bluetooth
1. "COM"
2. "Mobile devices"
3. Tilt the Controller to the right.
4. "Settings"
5. "Bluetooth®"
6. Select setting.
Connecting the device
1. "COM"
2. "Mobile devices"
3. Tilt the Controller to the right.
4. "New device"
5. "Phone calls and audio"
The vehicle's Bluetooth name is displayed
on the control display.
6. Compare the control number displayed on
the control display with the control number
on the display of the mobile device, and
confirm that the two match.
7. A Bluetooth connection is established.
The mobile device is connected to the vehicle
and displayed in the device list.
72
Connections
Online Edition for Part no. 01405A89334 - VI/23
Frequently Asked Questions
All prerequisites are met and all required steps
were completed in the specified order. Despite
that, the mobile device does not function as
expected.
In this case, the following explanations can
help:
Why could the mobile phone not be paired or
connected?
▷ There are too many Bluetooth devices con-
nected to the mobile phone or vehicle.
In the vehicle, delete Bluetooth connections
with other devices.
Delete the Bluetooth connection from the
device list on the mobile phone and start a
new device search.
Too many Bluetooth devices are paired
with the same function. Adapt the functions
in the device list on the control display.
▷ The mobile phone is in power-save mode
or has only a limited remaining battery life.
Charge the mobile phone and deactivate
the power-save mode where required.
Why does the mobile phone no longer react?
▷ The applications on the mobile phone do
not function anymore.
Switch the mobile phone off and on again.
▷ Too high or too low ambient temperature
for mobile phone operation.
Do not subject the mobile phone to ex-
treme ambient temperatures.
Why can telephone functions not be used via
iDrive?
▷ Phone functions are not configured for the
mobile phone.
Connect the mobile phone with the tele-
phone function.
Why are no or not all telephone book entries
displayed or why are they incomplete?
OwnersManuals2.com