BMW 2 GRAN COUPE Series Manual page 192

Table of Contents

Advertisement

CONTROLS
4.
If necessary, "Driving"
5.
"Speed Limit Assistance"
6.
Select the desired setting.
The warning that is issued when a speed limit
is exceeded may depend on the Speed Limit
Assistant settings.
Additional information:
Speed Limit Assistant, refer to page 204.
System limits
System limits of the sensors
Additional information:
Cameras, refer to page 35.
Functional limitations
The system function may be limited and may
provide incorrect information in the following
situations:
For traffic signs that are fully or partially
concealed by objects, stickers, or paint.
When driving very close to the vehicle in
front of you.
In the case of navigation data that is inva-
lid, outdated or not available.
In areas not covered by the navigation sys-
tem.
When roads deviate from the navigation
such as due to changes in road layout.
In case of electronic traffic signs.
When passing buses or trucks with traffic
signs applied to them.
When the traffic signs do not correspond to
the standard.
When traffic signs that are valid for a paral-
lel road are detected.
In the presence of country-specific road
signs or road layouts.
192
Driver assistance systems
Online Edition for Part no. 01405A89334 - VI/23
Manual Speed Limiter
Principle
The system can be used to set a speed limit,
for instance to prevent the vehicle from ex-
ceeding speed limits.
General information
The system can limit the speed, starting at
20 mph/30 km/h. The vehicle can be driven
at any speed below the set speed limit.
Overview
Buttons on the steering wheel
Button Function
System on/off.
Store current speed.
Speed Limit Assistant: accept sug-
gested speed manually.
Rocker switch:
Changing the speed limit.
Operation
Turning on
Press the button on the steering
wheel.
The current speed is adopted as the speed
limit.
If the system is switched on while the vehicle is
stationary or driving at low speeds, the speed
limit is set to 20 mph/30 km/h.
The marking in the speedometer is set to the
corresponding speed.
When the speed limit is activated, Dynamic
Stability Control is switched on and the vehicle
may change to COMFORT drive mode.
OwnersManuals2.com

Advertisement

Table of Contents
loading

Table of Contents