Table of Contents
Advertisement
CONTROLS
The air flow can be adjusted with the program
active.
AUTO program
Principle
The AUTO program cools, ventilates or heats
the car's interior automatically.
The air distribution and the temperature are
controlled automatically depending on the in-
terior temperature and the desired tempera-
ture setting including the selected intensity of
the air flow.
Switching the AUTO program on/off
Using the button:
Press the button.
The LED of the button is illuminated
with the AUTO program switched on.
Via iDrive:
1.
"CAR"
2.
"Settings"
3.
"Climate control"
4.
"Heating/ventilation"
5.
"Driver"
6.
"Automatic"
Depending on the selected settings and out-
side influences, the air is directed to the wind-
shield, side windows, upper body, and into the
footwell.
Point the side air vents toward the side win-
dows.
The air conditioning is switched on with the
AUTO program.
At the same time, a condensation sensor con-
trols the program so as to prevent window
condensation as much as possible.
The AUTO program is switched off automati-
cally, when manual air distribution is set.
230
Climate control
Online Edition for Part no. 01405A89334 - VI/23
Adjusting the intensity of the air flow
With the AUTO program switched on, the in-
tensity can be adjusted. This changes the au-
tomatic control for the air mass.
Using the button:
Press the lower or upper side of the
button: decrease or increase intensity.
Via iDrive:
1.
"CAR"
2.
"Settings"
3.
"Climate control"
4.
"Heating/ventilation"
5.
"Driver"
6.
"Level"
7.
Set the desired intensity.
The selected intensity is shown on the climate
control display.
Automatic recirculated-air control
Principle
The automatic recirculated-air control recog-
nizes pollutants in the outside air. The outside
air supply is shut off and the interior air is recir-
culated.
General information
When the system is activated, pollutants in the
outside air will be detected. The supply of out-
side air is automatically disabled.
If the system is deactivated, outside air contin-
uously flows into the interior.
With constant air recirculation mode, the air
quality in the interior deteriorates and window
fogging increases.
If there is window condensation, switch off re-
circulated-air mode or defog the windows.
OwnersManuals2.com
Advertisement
Table of Contents
