Maintenance; Return To Cembre For Overhaul - Cembre B15MA Operation And Maintenance Manual

p
rotect the tool from rain and moisture
e -
lectro hydraulic tools should not be operated in pouring rain or under Water
3.1) Using the battery charger
Carefully follow the instructions in the battery charger manual.

4. MAINTENANCE

The tool is robust, completely sealed, and requires very little daily maintenance.
Compliance with the following points, should help to maintain the optimum performance of the
tool:
4.1) Thorough cleaning
Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the tool must be wiped with a clean cloth taking care to remove any residue,
especially close to moveable parts.
4.2) Storage
When not in use, the tool should be stored
and transported in the plastic case to prevent
damage. The case is suitable for storing the
tool, the accessories and die sets.
Plastic case: VAL P22, size 465x315x135 mm
(18.3x12.4x5.3 in.) weighs 1,5 kg (3.3 lbs).

5. RETURN TO Cembre FOR OVERHAUL

In the case of a breakdown contact our Local Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if pos-
sible, attach a copy of the Test Certificate supplied by Cembre together with the tool or, if no
other references are available, indicate the approximate purchase date and the tool serial number.
7
FIG. 4
. W
ater Will damage the tool and battery
15
2
.
.